Coffee ground collector Metos Cafina XT-F adjustable
Full description
The coffee grounds separator should be screwed to the base/floor during installation. If screwing is not possible, the supplied rubber feet can be used.
To feed-through the connection hoses and connection cables, the aperture for the machine in the table top is used. The device is supplied with power via the coffee machine. For the operation of the coffee grounds separator, an easily accessible arrangement must be ensured. It must be possible to remove the separation drawer freely as well as to empty the grounds collection container.
The device is height adjustable in seven steps of 42.5 mm each. Depending on the step, the maximum permissible height of the on-site waste water connection will be lower.
Waste water connection: min. DN 50 - NW 2" – a ventilated odor trap is to be provided Capacity grounds collection container: approx. 14 l (approx. 10 kg, approx. 100 l coffee)
Technical specification
General
- Description
- Coffee ground collector Metos Cafina XT-F adjustable
Dimensions and Capacity
- Product capacity
- 10 kg
- Item width mm
- 436
- Item depth mm
- 541
- Item height mm
- 438-693
- Package volume
- 0.21 m3
- Package dimensions (LxWxH)
- 50x60x70 cm
- Net weight
- 28 kg
- Package weight
- 30 kg
Technical information
- Drain diameter
- 50
- Drain conn. height mm
- 150
- Floor drain needed
- Yes